So for broadcasting I have set up SKYPE to use ADAT 1/2 and return on ADAT 3/4. I broadcast on internet radio as well as using it as a recording device in my studio. Return is set up from the Mixer Record bus to ADAT 5/6 and this is set up as default input on the PC. The Broaadcasting software (SAM) routes the decks to the ADAT 7/8 and the cue channel is sent to ADAT 5/6 all these are patched to the mixer. So on the PC ADAT 7/8 is set to the default output and this is routed to the Mixer through the above setup. Then using the internal mixer I route the channels to ADAT which is then passed to a Yamaha i88X then to a Yamaha 01X over Mlan. My current setup is the 828 mk2 routed over FW. I don’t see any way of routing software to the channels in the 828. I have been given a Mac Book Pro (2.4 I7 8Gb Lion) to evaluate so gor a cable and put the drivers on, connected up the 828 and it worked straight away. I have had a few issues with the PC crashing at critical moments and this prompted me to find an alternative. I have been run a MOTU 828 Mk 2 on a PC and have been for a number of years without problems.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |